Home / Service areas / McKinney
Electrician in McKinney, TX
From older homes near historic downtown to newer builds out west, we handle McKinney EV chargers, panels, lighting and repairs.
214-774-2150 Call now Text a photoOlder homes and new ones
McKinney has a wide mix. Older homes can have undersized panels, missing grounds or panels that should be replaced. Newer homes mostly need chargers, lighting and the occasional mystery breaker. We handle both and pull permits with the City of McKinney.
What we do in McKinney
- Panel replacements and service upgrades, including Federal Pacific and Zinsco panels.
- EV charger installation.
- Lighting and ceiling fans.
- Repairs and troubleshooting.
- Generator inlets and standby generators.
Neighborhoods we work in
Craig Ranch, Stonebridge Ranch, Tucker Hill, Trinity Falls, Eldorado and all of McKinney.
How the age of your home changes the job
McKinney runs from older homes near historic downtown to newer builds out west. The same request can mean very different work in each, so here is what we look at first.
In an older McKinney home
- Adding a charger: the panel comes first. An undersized panel or missing grounds may need attention before a new circuit goes in, and a load calculation shows how much room you really have.
- Changing a light or fan: we check the box and wiring, because a new fixture should not sit on a tired connection. If we find brittle wire or a loose box, we fix what is needed and explain what we found.
- Hooking up a generator: an interlock needs a panel in good enough shape to accept it, so we look at that first.
- Chasing a problem: the usual causes here are missing grounds and worn panels. We explain what caused the problem, not only what we replaced.
In a newer McKinney home
- Adding a charger: often this takes only a new circuit. Most 200 amp panels can carry one, and we still run the numbers so the breaker holds up with the AC, dryer and oven on.
- Upgrading lights: think chandeliers on high ceilings with the right support box, recessed LEDs with dimmers that do not flicker, and pendants spaced and leveled over an island.
- Tracking down a mystery breaker: a breaker that trips over and over or will not reset can happen in any house. We find out why it trips.
If you run a McKinney business
We also work on tenant finish-outs, office power and lighting, data rough-in and EV chargers for McKinney businesses. Property managers can call us for service calls and small projects too.
Recent work
A few of our jobs from around North Texas, including the kinds of panel, repair and lighting work McKinney homes call us for.






Reviews from our customers
- ★★★★★
“Hired Mo and Abe from Tesla Electric DFW to install a Tesla charger in our garage. They did a great job and were professional and courteous. Would recommend.”
Thomas B., Google - ★★★★★
“Exceptional and Excellent Service. They were very professional, yet friendly and walked me through every step of the work. I would highly recommend them.”
Asama P., Google - ★★★★★
“Quick response times and updates. Answered questions in detail. Realized install was done on a holiday!”
Sean L., Prosper, Google - ★★★★★
“Sean did a great job installing some pendant lights in our home and dealing with some fairly ancient wiring. I would recommend him to anyone with electrician needs.”
Thumbtack customer, Thumbtack - ★★★★★
“We will definitely use Tesla Electric again! We had some weird wiring in our new house and he was able to research and fix several things.”
Thumbtack customer, Thumbtack - ★★★★★
“He didn't rush to quote us until he had assessed the situation and knew exactly whether or not he could complete the work for us. He did a fantastic job installing the fan.”
Jay C., Thumbtack
Panels are a big part of our McKinney work
If your house is on the older side, this is the first thing to check. Open the panel door and look for any of these, then see our McKinney panel page or text us a photo:
- A Federal Pacific Stab-Lok or Zinsco label. These brands have a history of breakers that fail to trip.
- Rust or scorch marks, or a burning smell or buzzing coming from the panel. Treat a burning smell as urgent and call us.
- Breakers that feel warm or trip often.
- No open spaces left, right when you want to add a charger, hot tub or shop.
You may not need the bigger job
Swapping a panel at the same size is a replacement. Raising the amps coming into the house, say from 100 to 200, is a service upgrade, and it usually means a new meter base and work with the utility. Plenty of homes need only a replacement or a subpanel, and we will tell you which one fits yours.
What the day looks like
We schedule the disconnect with your utility, Oncor or CoServ. Most replacements take one working day, with the power off for part of it, and every circuit gets labeled at the end. A service upgrade can run longer, depending on the utility's schedule. If you want whole-home surge protection, this is a good time to add it, since it is a small add-on during a panel job.
What to text us for a McKinney price
Many jobs can be quoted from photos. Send these to 214-774-2150:
- EV charger: your panel with the door open, and the spot where you want the charger.
- Panel work: your panel with the door open, and the meter outside.
- Lights and fans: the ceiling, plus a link to the fixture if you already picked one.
- Generator: your panel, and the outside wall where the generator would sit.
- Repair: a photo or short video of the problem, and your panel.
- Commercial: your plans and bid date, or photos of the space.
If we need to see the job first, we will visit and give you the price before we start. Troubleshooting is the one exception, and we explain the diagnostic cost up front.
Permits with the City of McKinney
Most of this work needs a permit, and in McKinney it goes through the city. Older and newer homes can need different scopes, so we confirm what the permit should cover before work starts. Panel replacements and service upgrades need a permit and inspection. We pull the permit and stay with the job through final inspection, so you don't have to deal with the city yourself.
Questions from McKinney customers
Should I replace a Federal Pacific or Zinsco panel?
Federal Pacific Stab-Lok breakers have a long record of failing to trip under overload, and Zinsco panels have a similar history. Not every one fails, but most electricians and many insurance companies recommend replacing Federal Pacific panels. Text a photo of yours to 214-774-2150 and we will tell you what you have.
Can my older McKinney home handle an EV charger?
Often, yes, but the panel decides. We run a load calculation first. If the panel is tight, the options are a smaller circuit, a load-sharing setting on the charger, or a panel upgrade if it really needs one.
What happens if you find old wiring behind a light?
A fixture swap can turn up brittle wire, missing grounds or loose boxes. We fix what is needed so the new light is safe and explain anything we find.
Do you work in my part of McKinney?
We work across McKinney, including Craig Ranch, Stonebridge Ranch, Tucker Hill, Trinity Falls and Eldorado. If your neighborhood isn't listed, call or text 214-774-2150 and ask.
Can you come out today?
Same-day visits are often available, especially for urgent problems. Call or text and we will give you the earliest time. If you see sparks, smell burning or find a hot outlet, turn off that breaker and call us.
